YouTube Edutainer & Tech Communicator, Additive Manufacturing Engineer, Podcaster and Father.
Deutschland
- Tweets 6,214
- Following 244
- Followers 39,460
- Likes 13,342
Stefan - CNC Kitchen retweeted
Bambu Lab R1, the CO₂ laser built with the same motion control as our printers.
Every cut lands where it should.
The specs you've been asked about:
• 55W CO₂ Laser - cuts up to 20mm single-pass cutting
• 600 × 300 mm bed, 3m throughput with conveyor
• 1000 mm/s max speed without losing detail
• Auto laser alignment, first for a CO₂ laser cutter
• Cameras, lasers and encoders work as one, within 0.2mm positioning accuracy
Big job. Light work.
Explore R1 share.bambulab.com/4x1dnCq
46
268
2,815
579,647
NEW Video: I thoroughly tested the @sunluofficial i10 Filament Dry Cabinet for six weeks!
piped.video/bYWatIh1LzQ
7
7
81
7,825
NEW VIDEO (which I should have made a year ago): My favorite shop tool: Which is the better 3D scanner?
piped.video/watch?v=6Pe7mMFp…
6
2
24
2,883
Mine came out great! Had one pause of a few hours because a tool came loose, which caused a slight line on the print, but otherwise it was almost flawless!
Got to the studio, finally saw this in person, VERY happy with it. Hey @CNC_Kitchen how does yours look?
4
3
128
7,389
It's crazy to see the dot pattern on a night-vision camera that Apple's FaceID sensor blasts at you to 3D scan your face every time you unlock your phone.
16
6
356
373,268
Look at that beautiful 8-color print of Majora's Mask on the CoreOne INDX Prusa Edition!
10
2
200
17,499
This is awesome! I took some Waymo rides a few weeks back in San Francisco, and they were among the most pleasant taxi rides I've ever had.
I hope this will also help transportation here in the countryside at some point, because getting a taxi at night is nearly impossible.
Servus, München! 🇩🇪 We’re bringing the Waymo Driver to Germany. Over the coming weeks, our vehicles will arrive in Munich to begin laying the groundwork to launch our fully autonomous ride-hailing service in late 2027!
Read more: waymo.com/blog/2026/08/waymo…
5
2
24
3,600
Happy that our inserts worked for you!
Lost opportunity when opening the door; imagine the engagement if you brought the first version speakers back from the curb to change the driver plates.
Anyhoo - hello from Oz and glad you found @CNC_Kitchen
1
8
2,683
Awesome! Great to see it worked.
Got this figured out thanks to @gigaparts right here in Huntsville! I'm excited to explain this in due time. (Also thanks to Stefan at @CNC_Kitchen who helped behind the scenes).
2
53
6,723
Looking for a free, easy-to-use yet powerful tool to analyze your 3D scans? Check out my latest creation: ScanRuler.com
As always, fully Open Source - RT appreciated!
14
82
530
34,038
All NEW cnckitchen.com just went live! I'm super proud of it, to be honest. Old-school without any ads or cookie banner. It would be great if you could give me a quick feedback on whether it works on your end as well!
14
20
192
8,982
I would say that this is full circle! Normal soldering iron tips aren't for heat-set inserts; heat-set insert tips aren't for soldering. Good thing that we have over 40 resellers worldwide to get a replacement😅 cnckitchenwebsite.stefan-755… (NEW Website)
My students just found out that the @CNC_Kitchen installation tips can also be used directly for soldering electronics... 🤔
2
2
64
9,150
Can I finally get rid of my Photo Box? One is the Blender render of one of our Heat-Set Insert Installation Tips Boxes, and the other is the photo I made. Pretty happy with how it turned out.
19
4
184
16,137
Simulate your creations before you 3D print them with FilaSim - local, free and open source: filasim.com/
Model: printables.com/model/580979-…
6
10
156
8,565
Sneak Peek: FilaSim - FEA and Automated Infill Optimization in Your Browser
patreon.com/cnckitchen/posts…
15
27
289
15,872