@bucket0fish @Jorba__4 Thanks lads ☺️ So I got her back up and running. Very strange that it just posted after being left alone for a while. Gave the rig a good clean out. Lot of dust and sand build up. I think it might be the PSU it would explain why it's so bipolar anytime you take anything out and its a bastard to get her to post. Might have been the cleaning of the ram slots and GPU slot with alchohol. Not checked the thermal paste, that could be it. She's not running hot though, temps are fine. It's just encoder overload issues on OBS, games that have run with no issues in the past are now causing an overload. So streams are stuttering and cutting out. Run SFC, checked for drive errors. Put the disks and M.2 through a tester to see if it's the drives that are on their way out. They are fine as well. Settings are fine on OBS can't go over 720 60 FPS on Starlink through Rumble studio or the streams look awful. So I'm vexed. I'm guessing it's going to happen again as it was a slog to get it to post.