Founder @Kiln3d | Investor @NGC_Ventures | Prev. @MessariCrypto
Earth
- Tweets 867
- Following 405
- Followers 971
- Likes 3,063
Pinned Tweet
the vid in tweet 1 is a 3D stage i built on MCP Apps, running INSIDE the @claudeai app
you type what you want and the object spawns right there in your chat. spin it, look underneath, then print the thing for real
apps that can't draw panels get a url link to the same stage 😁
1/13
Kiln 1.3 is out: three releases this week, 1.3.0 to 1.3.2.
Most AI design demos end on a screen. Ask Kiln for a part and you can turn it over in 3D, then print it and hold it.
Kiln's own 3D stage: see it in your agentic chat, or get a url for your browser. 🧵
1
2
7
828
Kiln has hit 50+ stars on GitHub! ⭐️
This is a great milestone, but it is just the beginning. We aim to get Kilns into the hands of millions of people worldwide.
If you've enjoyed Kiln, please check us out and star us on GitHub here: github.com/codeofaxel/Kiln
4
5
13
106
1/13
Kiln 1.3 is out: three releases this week, 1.3.0 to 1.3.2.
Most AI design demos end on a screen. Ask Kiln for a part and you can turn it over in 3D, then print it and hold it.
Kiln's own 3D stage: see it in your agentic chat, or get a url for your browser. 🧵
4
8
17
1,653
the vid in tweet 1 is a 3D stage i built on MCP Apps, running INSIDE the @claudeai app
you type what you want and the object spawns right there in your chat. spin it, look underneath, then print the thing for real
apps that can't draw panels get a url link to the same stage 😁
1/13
Kiln 1.3 is out: three releases this week, 1.3.0 to 1.3.2.
Most AI design demos end on a screen. Ask Kiln for a part and you can turn it over in 3D, then print it and hold it.
Kiln's own 3D stage: see it in your agentic chat, or get a url for your browser. 🧵
1
2
7
828
I built this on MCP Apps: the interactive-interface extension to MCP.
Kiln speaks the 2026-07-28 spec, which shipped last week. It's been great to build on 🙌 @ClaudeDevs
4
29
Adam retweeted
Most "long-running" agent work is a couple of minutes. A 3D print can take hours on real hardware, so the connection has to survive it.
Tasks matter here. Start the job, get a ticket back, return to a finished object.
Huge unlock 🔥 @Kiln3d
4
5
10
291
1/ Kiln 1.1.8 is out, and it's a big step toward AI agents running real production, not just hobby prints.
Your agent can now judge if a part survives the real world, pick the glue that truly holds it, write factory-floor instructions in 7 languages, and more 🧵
1
4
11
257
This is the whole reason for building Kiln. A user pointed their agent at a @BambulabGlobal A2L (which came out this week), and it just worked first try. No tweaking.
Agents running real machines isn't someday, it's now. 🙏🔥
impressed by the 3 day turnaround.
i tried the agent on the A2L and it synced without my tweaking.
what’s the biggest hiccup you saw on first run?
4
5
14
526
We at @Kiln3d ship fast! 💨 control the brand new @BambulabGlobal A2L with your AI agent, 3 days after its launch. Let's build 🖨️
1/ The @BambulabGlobal A2L launched June 1. Kiln supported it 3 days later. Connect the A2L, point your AI agent at it, and it's already dialed in: ready to design, slice, and print, with no setup on your end. A thread 🧵:
3
7
274
1/ Kiln 1.1.7 is out. Command your @BambulabGlobal printer to dry its own filament, clear a backed-up print queue in one tap, report a bug as you chat with your agent, and more. A thread 🧵
4
5
10
193
A 3D print fails. Normally you find out hours later, walking back into a tangled mess.
Kiln v1.1.2 + v1.1.3 fix that: your AI agent watches the camera, catches the failure, and steps in.
Kiln is a free, open-source MCP server for AI agents to run 3D printers. New this week:
2
4
17
18,790
Your 3D printer has its own dimensional bias.
The kind of difference that makes a snap fit either function, or not.
Even between two of the same model of device off the same assembly line.
For users on Pro tier subscriptions and above, Kiln v1.1 captures it. 🧵
2
3
10
263
Been working hard to ship v1.0 of @kiln3d , and today, it is finally here.
Try controlling your 3D printer using Kiln with @claudeai, @OpenAI 's Codex, or your @openclaw, and experience the magic!
Kiln v1.0 is now live. We've been busy — 750+ MCP tools and counting.
Spawn an object into existence. @kiln3d is how AI agents make real things — safely, on any 3D printer
Control 45 printer models by @BambulabGlobal @Prusa3D @Creality3dP @OctoPrint3D @Elegoo_Official & more 🖨️
3
10
20
768
Study @Kiln3d
Once you use it, it's hard to go back to doing things manually😁
Havent manually used PrusaSlicer since Kiln gave me access.
You don’t need to know how to design, you just need to know what you want
1
1
7
172
Adam retweeted
Havent manually used PrusaSlicer since Kiln gave me access.
You don’t need to know how to design, you just need to know what you want
Kiln v1.0 is now live. We've been busy — 750+ MCP tools and counting.
Spawn an object into existence. @kiln3d is how AI agents make real things — safely, on any 3D printer
Control 45 printer models by @BambulabGlobal @Prusa3D @Creality3dP @OctoPrint3D @Elegoo_Official & more 🖨️
1
4
9
701
Kiln v1.0 is now live. We've been busy — 750+ MCP tools and counting.
Spawn an object into existence. @kiln3d is how AI agents make real things — safely, on any 3D printer
Control 45 printer models by @BambulabGlobal @Prusa3D @Creality3dP @OctoPrint3D @Elegoo_Official & more 🖨️
11
12
35
48,663
Anthropic just dropped Claude inside Microsoft Word.
Imagine drafting and editing documents without leaving Word.
Claude can now write with tracked changes and keeps your formatting intact.
Claude
Claude for Word is now in beta.
Draft, edit, and revise documents directly from the sidebar. Claude preserves your formatting, and edits appear as tracked changes.
Available on Team and Enterprise plans.
21
26
207
44,650
