Rockchip LV1106
Vision processor MPU, ARM Cortex-A7
$13.62 each, $10.82 @ 100
No, this isn't just a microcontroller. This is a whole single board computer wearing a QFN skin suit, a multi-chip module that places DDR3 right next to the chip.
2x CSI interfaces and USB-HS too.
15
9
275
26,432
the plan? we reindustrialize with Chinese equipment to make American dollars to then reindustrialize with American equipment
4
2
62
2,842
STMicroelectronics VL53L9CX
2.3K LiDAR Sensor
$63.36 each, $49.58 @ 25
They fit a whole WAYMO in this thing. Not really. I2C/I3C + CSI interfaces for up to 100Hz update rate. Supports <5cm-8.8m ranging.
Pre-order a STEMMA QT breakout here: americanembedded.com/store
20
52
958
295,907
Wow those part numbers look very similar to STM32 part numbers.
Wow that feature set looks very similar to STM32s.
Wow these pin-outs are completely compatible with STM32s.
Wow these register maps are exactly the same as STM32s.
Probably a coincidence!
Artery releases new mainstream Cortex-M4F MCUs with optional high-speed USB OTG PHY
cnx-software.com/2026/09/03/…
The AT32F406 and AT32F408 are Arm Cortex-M4F MCUs running at up to 216 MHz, with the F408 adding a USB OTG High-Speed PHY. Both offer DSP instructions, integrate up to 512 KB Flash and 192 KB SRAM, and a 4 KB OTP memory for critical data and parameters. The microcontrollers also offer a QSPI interface for external Flash or RAM expansion, and a range of digital and analog peripheral interfaces.
The AT32F406/F408 are supported by Artery’s AT32 IDE, VS Code extension, Workbench, AI Studio, and AT-Link tool. Two development boards are listed in the documentation, but they don't seem to be available for sale right now.
7
10
172
14,008
The American Embedded shop now ships internationally.
Check it out here: americanembedded.com/store
3
37
13,056
We've developed a USB hub using this chip. You can pre-order now! It's really great for protecting your devices (looking at you el segundo chuds)
Texas Instruments ISOUSB211
Isolated (8kV) USB high-speed (480mbps) repeater
$12.77 each, $7.52 @ 2k
One of only a few integrated USB isolators that can support USB-HS, most others are limited to just 12mbps!
Users report better radiated emissions performance vs. ADuM4165.
1
31
4,016
wow American Embedded has been cooking that's crazy
updates to American Embedded store. the VL53L9CX STEMMA QT board is available for pre-order. Expected delivery before end of month.
americanembedded.com/store
1
32
1,999
What would you want to see in a tiny little formfactor?
We’ve been kicking around an ultra-cheap power profiler + logic analyzer design for a while.
A compact USB multitool for hardware bring-up, debugging and field work
blog.adafruit.com/2026/09/01…
2
18
2,182
There’s an open PR in KiCad that adds basically what this site does. “Pin groups” won’t allow you to misuse, say, SCL from one I2C peripheral and SDA from another. Thanks KiCad.
17
1,829
BROOOO C IS THE GHOST OF A PDP-11 BROOO BRANCH PREDICTION CACHE RAM BROOOO
Meanwhile vro is writing Typescript
2
20
1,996
Allwinner or Rockchip? Call it.
Credit card-sized Allwinner A733 SBC with up to 128GB soldered-on eMMC flash.
cnx-software.com/2026/09/01/…
@Armsom_official Sige6 SBC also features up to 16GB LPDDR5, a microSD card slot and an M.2 M-key PCIe 3.0 x2 slot for storage, Gigabit Ethernet (with optional PoE), WiFi 6, and Bluetooth 5.4 connectivity, HDMI 2.0 and MIPI DSI display interfaces, a MIPI CSI camera interface, USB 3.0/2.0 ports, a 3.5mm audio jack, a 40-pin GPIO header, and more.
The company provides support for Debian 11 and Android 13, and Armbian might support it too.
1
13
1,317
Check out KiStack NOW
the AUTHORITATIVE SET OF KiCad SKILLS TO USE WITH YOUR AGENT
github.com/American-Embedded…
5
9
175
24,987