I'm Seon, the Unexpected Maker! Hardware designer & manufacturer, software engineer, 3d printing & laser cutting, general maker & tinkerer & YouTuber.
Melbourne, Australia
- Tweets 12,820
- Following 404
- Followers 8,354
- Likes 7,515
Next #livestream I'm going to be working in #KiCAD doing some #esp32s31 things.
I hope you see you in the chat :)
#maker #electronics #projects
piped.video/live/OVfDrT5NfHU…
6
313
TADA! First build - all working perfectly! Unfortunately, there are a few holes in ESP-IDF S31 support right now - some will get filled, and some likely wont :(
Biggest show stopper right now is this:
github.com/espressif/esp-idf…
#ESP32S31 #FeatherS31 #Espressif
2
3
13
1,014
Next #livestream I'm going to let you decide if the Smart Hub in it's current state is HUB-TASTIC or HUB-TRASH, plus I have #ESP32S31 news!
#maker #projects #electronics #microcontrollers
piped.video/live/THYIYkuCA4c…
4
486
I've decided to retire my #TinyC6 - but only because I'm going to replace it with my new TinyC61[D]
!The C6 and C61 are a little different, so not 100% drop in compatible, but but it's a Series[D] board with dual Antenna, 8MB of Flash, 2MB of PSRAM, I2C Fuel Gauge + more!
1
32
1,317
Hey folks! Next #LiveStream I'm just going to be HUB-ING around... I hope you can join the fun!
piped.video/live/S8hXnf5WlfE…
#maker #usbsmarthub #project
1
430
Something I'm working on... GIF does it NO justice, but wrong aspect for video.
#makerlife #neverending #projects
1
1
6
493
Next #livestream I'm going to go over the secret cat door project - or not ;) I hope to see you in the chat!
piped.video/live/eArAxQ7CryI…
#maker #secretprojects
1
405
On this weeks #livestream I'm going to **FINALLY** assemble the V2 Smart USB Hub PCB... fingies and toes crossed I get the RGB LED orientations correct this time!!!
#maker #projects #pcbbuild
piped.video/live/--9faAdR1CU…
2
404
I'm #LiveStreaming tomorrow - but what? A great question! I'll let you all know after the stream finishes. piped.video/live/XdbXfXfWP-I…
#maker #projects #chat
1
341
Super busy day in @kicad_pcb today - Here's the updated design for my ESP32-S3 Smart USB 2.0 6 Port Hub I was assembling on my stream last week.
Now includes powering monitoring per port via 2x INA3221 ICs and a temp/humidity sensor.
#maker #pcbdesign
3
3
77
3,273
I'm getting closer to being able to show what I've been working on for the longest time... but I'm not quite there yet, so instead, I thought I'd throw up a teaser image "with product branding removed" - because I'm an ass ;)
#maker #electronics #projects
1
10
596
This is the week! This #livestream I am going to assemble the first USB 7 Port "Smart" HUB - and see if it even works... My money is on NO - You?
I hope to see you all in the chat...
piped.video/live/dH51BfOcukg…
#maker #projects #electronics #pcb #assembly
1
354
WOW, Opus 4.8 and latest claude-code is THE WORST update @AnthropicAI have released to-date.
Insanely terrible. But, I guess, the fact that Claude is honest about its screw-ups offsets the constant screwups .... right???? maybe??? NOT AT ALL!
My first 3 tasks with 4.8...
3
13
1,180
And then the actual first edit results boot looped my target device, and after pasting the stack trace back to Claude - it's fix was to change totally unrelated code - and the boot loop continued in the identical way.
Seriously? Did I miss something about this update?
1
4
628
I just told claude to read my heap_allocation_optimisation.md doc/rule-set, and then got it to implement a feature, and Claude broke almost every heap allocation rule in the document....Right after reading it.
But at least, when challenged, claude "owned the mistake" #facepalm
2
3
488
Next #livestream I'm going to be messing around in #fusion360 designing a case for a PCB some of you might recognise ;) piped.video/live/Msom3vlxM3I… #maker #projects #design #3dprinting
1
2
349