Just ordered one of the Breakout boards yesterday.

October is coming ⛏️ Point to Parasite Pool for our next BLOCK PARTY 10/2/2026 4:20PM ET Home Miner connection: Stratum: http://parasite.wtfPort: 42069 Alt: stratum+tcp://parasite.wtf:42069 High Difficulty Port Info: stratum+tcp://parasite.wtf:42068

Can you add an option to: re-initialize the LEDs? So additional 5v LED strips can be added, and synchronized with the colors?

I'll have to try. I would imagine it's possible, not sure if there is a hard limit on the addressable LED's limited by hardware or software. I just know on my other LED devices, if you add additional LED strips, you have to re-initialize to pickup the new addresses.

@hammerminer The RGB controller for the fan, seems to be locked to the fan. When plugging in additional LED RGB strip to the split, it illuminates but doesn't change color. Is there a way to add a "reconfigure" button In the ThorOS to detect new programmable LED strips?

I'm using KS5 Kaspa Miners. 20th/s

So fast my transactions arrive before I finishing sending them! 😆🫣🤣

Pretty awesome, my bags being stacked too

Purchased a M2 with a 3W UV laser. @xToolOfficial Going to try using it to customize the labels on the disks.

Bitaxe replacement OLED screens are now available. The 0.91" I2C display drops into the original 4-pin header and brings back a clear live readout when the stock screen goes dim, loose, or blank. avoidbit.com/products/bitaxe…

M2 xTool w/ 3W IR laser on the way! Hoping to add some cool customization options. One day... UV laser, right now those are $$$

3.25 flopp disk replica, holds a @Tangem card in style. Can even place your phone on top, without having to remove.

Still trying to dial it in... This part out of 4 is the most challenging, the other 3 are 🤌. Trying different techniques, just increased my Infill/Wall overlap as the last issue remaining... Also ordered some @BambulabGlobal PETG support material, to see if it's any better.

⛏️Always wanted to try solo Bitcoin mining but not ready to drop hundreds on hardware, deal with noise and heat, or run your own node? 🎲That's exactly why I've highly recommend @LuqEEMiner for beginners! 🚲For just $2.99 you can solo mine Bitcoin for a full week. No miner, no setup, no experience needed. Think of it as solo mining with "training wheels". Here's what I like about it: ✅ Pay with a credit card, to make it easy to get started and safe! ✅ Rewards go straight to YOUR wallet, with no custody platform custody. ✅ Mine BTC, BCH, or split between both! ✅ Burst solo mining: you pay for a baseline, but your hashrate periodically spikes way above it. I watched mine jump to 100 TH/s on a 1 TH/s miner plan! Try a week, see if you like the lottery feeling of chasing a block, and then decide if you want to go bigger. Either with more hashrate with Luqee or your own Home Solo Mining Army! Checkout Luqee Today➡️ geni.us/LuqeeHOBBYIST Use code HOBBYISTLKY26 at signup for 100 GH/s free for 14 days plus a Power Pass for their Power Mining Events. 🍀Mining isn't guaranteed, so only spend what you're OK with. That's the fun of it. 📺Full walkthrough in the video

I think all the settings have been dialed in, last solo print was flawless. Trying an entire batch now.

I've tried on single nozzle and it was a failure. Not to say it couldn't work, but you would need to purge much more than the default. The issue is remnants of PLA stay in the nozzle between swaps and will weaken your PETG layers to the point they will peel apart. I only use this technique in my H2C with a dedicated PLA (left) nozzle.

More times than not, it takes longer to get the slicing profile dialed in just right. Supports, speed, technique, layer height, tolerance and the other settings. Recently started using PLA for my support interface on some newer designs to allow for a clean, smooth PETG surface.

NEW CREW MEMBER!!!! @AVOIDBIT HAS ENTERED THE BONANZA AND GET READY FOR SOME EPIC CUSTOM GEAR!

The Nexus QX1. A device that takes design ques from many different miners and rolls them into one. In this video I take a look at that. Plus add one little mod that's changed temps decently .Thanks to @JustNTime83 for the donation! piped.video/7G2Gj7xOApM

Damn, why do you try and take all my money?! 🤣🫣😆 Can't wait, although not in the budget ATM. Likey Q1 next year for me. Awesome job, @BambulabGlobal !