Custom 3D printed innovations for crypto miners! Build & customize with BitTrak, LaunchPads, JetPaks & more for Bitaxe/Nerdaxe setups. Shop at avoidbit.com
- Tweets 2,208
- Following 637
- Followers 1,195
- Likes 4,572
You can now create truly unique designs by selecting your desired colors and options. With countless combinations available, you have greater flexibility to personalize your collection according to your style preferences.
...preparation for what comes next!
4
4
26
2,631
@hammerminer The RGB controller for the fan, seems to be locked to the fan. When plugging in additional LED RGB strip to the split, it illuminates but doesn't change color.
Is there a way to add a "reconfigure" button In the ThorOS to detect new programmable LED strips?
2
4
316
For the last 6-12 months I've been using AI to build a math game my kids would actually play.
Every model update I tried again. Every result: bored in 5 minutes, AI-slop art, or too buggy for a kid.
@claudeai's Opus 5.5, 24 hours: a 3D game where every attack is a math problem, 70 K–6 skills that adapt to each kid, and co-op for up to 4. It also played its own game frame by frame to make this trailer.
First version my kids ask to play again.
5
1
16
740
get rid of that shit power supply that blew your VR
this must be the 1000th unit i see with same problem.
send your unit to @SoloMinerRepair for a repair and grab your self a proper power supply thats built for 24/7 demanding ops.
3
3
18
341
avoidbit retweeted
WE WILL NOT STOP! THE BONANZA IS GROWING!
@HASHWATCHER IS GIVING CODES FOR THEIR WATCHER APP!!!
1
3
11
168
avoidbit retweeted
October is coming ⛏️
Point to Parasite Pool for our next BLOCK PARTY 10/2/2026 4:20PM ET
Home Miner connection:
Stratum: http://parasite.wtfPort: 42069
Alt: stratum+tcp://parasite.wtf:42069
High Difficulty Port Info: stratum+tcp://parasite.wtf:42068
11
41
100
2,446
🚀 V1.0.3 Beta loading for P2! 🛠️
Here's what's coming: 👇
1️⃣ Simple on-device UI — now with custom images 🎨📱
2️⃣ Almost zero restarts — change freq, voltage, network config, or pools without rebooting ⚡🔄 (only force restarts for serious issues like abnormal hashrate 🛡️)
3️⃣ Multi-pool support — switch pools instantly, no restart needed 🌐✨
5
6
25
2,391
Interesting...I wonder if it would do that with @HarloLabs os
1
1
39
Purchased a M2 with a 3W UV laser. @xToolOfficial
Going to try using it to customize the labels on the disks.
17
Bitaxe replacement OLED screens are now available.
The 0.91" I2C display drops into the original 4-pin header and brings back a clear live readout when the stock screen goes dim, loose, or blank.
avoidbit.com/products/bitaxe…
3
11
404
Still trying to dial it in... This part out of 4 is the most challenging, the other 3 are 🤌.
Trying different techniques, just increased my Infill/Wall overlap as the last issue remaining...
Also ordered some @BambulabGlobal PETG support material, to see if it's any better.
23
avoidbit retweeted
⛏️Always wanted to try solo Bitcoin mining but not ready to drop hundreds on hardware, deal with noise and heat, or run your own node?
🎲That's exactly why I've highly recommend @LuqEEMiner for beginners!
🚲For just $2.99 you can solo mine Bitcoin for a full week. No miner, no setup, no experience needed. Think of it as solo mining with "training wheels".
Here's what I like about it:
✅ Pay with a credit card, to make it easy to get started and safe!
✅ Rewards go straight to YOUR wallet, with no custody platform custody.
✅ Mine BTC, BCH, or split between both!
✅ Burst solo mining: you pay for a baseline, but your hashrate periodically spikes way above it. I watched mine jump to 100 TH/s on a 1 TH/s miner plan!
Try a week, see if you like the lottery feeling of chasing a block, and then decide if you want to go bigger. Either with more hashrate with Luqee or your own Home Solo Mining Army!
Checkout Luqee Today➡️ geni.us/LuqeeHOBBYIST
Use code HOBBYISTLKY26 at signup for 100 GH/s free for 14 days plus a Power Pass for their Power Mining Events.
🍀Mining isn't guaranteed, so only spend what you're OK with. That's the fun of it.
📺Full walkthrough in the video
1
8
42
2,534
More times than not, it takes longer to get the slicing profile dialed in just right. Supports, speed, technique, layer height, tolerance and the other settings.
Recently started using PLA for my support interface on some newer designs to allow for a clean, smooth PETG surface.
1
8
347
I've seen this recommended quite a bit in the 3d community. My question is, does the petg/pla support opposite method work only on multiple nozzle printers or would it work on single Nozzle like my p1s as well?
1
2
55
I've tried on single nozzle and it was a failure. Not to say it couldn't work, but you would need to purge much more than the default.
The issue is remnants of PLA stay in the nozzle between swaps and will weaken your PETG layers to the point they will peel apart.
I only use this technique in my H2C with a dedicated PLA (left) nozzle.
1
32