AS Designs specializes in Super Safety and FRT related development and sales across a variety of platforms. We work with multiple developers currently.
- Tweets 229
- Following 39
- Followers 5,767
- Likes 397
ARHK has entered full production.
We have completed testing on all platforms (MP5, MP5K, G3/91, 11, 21, 23, 33, 51, 53, and 93) and everything is functioning great and held up to our torture testing.
We anticipate that our first drop of 1500 units will be in roughly 8 weeks and those will all be ready to ship at the time of the drop.
ARHK Key Info
- Drop-in trigger pack for HK roller delayed platforms and clones
- Uses stock lower just replace ejector when switching platforms
- Does not require an external slip trip
- Alligned with Navy and SEF markings (just swap selectors)
- The ARHK works in both Navy and SEF housings (both will be ambi to start) and comes with your choice of Navy or SEF selectors
- Includes your choice of either a 9mm or .308 ejector
- Works with all bolt carrier types
- WILL NOT WORK ON CETME (safety concerns)
55
24
516
39,059
ASDesigns retweeted
The Gathering 2026 is coming next weekend on March 20th and 21st! We couldn't do it without our Gold Sponsors, so make sure to check out their ranges and tables at the event! You can still get tickets by tapping the link below. We'll see you this Friday and Saturday in Clinton, South Carolina!
eventbrite.com/e/the-gatheri…
@ASDesignsFRTs @Springfield_Inc @btusallc @AACsuppressors
5
4
65
12,646
ASDesigns retweeted
The answer was the ARC-fire by @ASDesignsFRTs ..
This thing just runs. Go buy one, or 20.
Any 3 position FRT suggestions that aren't Rare Greed or Atrius? Looking for one that actually functions.
Or maybe this is a sign we should make our own..
16
15
520
57,320
You can now find the Geissele jig on our Odysee!
odysee.com/@ASDesigns:a/Geis…
5
8
95
10,412
Our MP5 hammer rounding jig for Geissele is here: odysee.com/@ASDesigns:a/Geis…
(The Leber V2 rounding jig works fine for milspec hammers)
2
2
35
9,838
Can confirm, MR762 (M110A1 clone) runs with ARC-Fire and a mil-spec AR FCG. Stock BCG, nothing special.
11
13
93
21,454
ASDesigns retweeted
Geissele trigger cutting guide for ARC-Fire mainly but this will also work with the super safety. The top left slide is very important for ARC users.
18
19
409
29,134
Time to keep your pinky out B&T boys 🧐
Super Safe APC45 & APC9
This is a lower kit we have in development at Active Safety Designs. This design does not require the upper to be milled.
activesafetydesigns.com
20
5
213
22,451
